-index_title=Sendmail Configuratie
-index_econfig=De sendmail config file $1 bestaat niet. Waarschijnlijk is uw <a href='$2'>module configuratie</a> incorrect.
-index_eversion=Uw sendmail configuratiefile is niet voor de laatste versie van sendmail. Webmin ondersteunt alleen versie 8.8 en hoger.
-index_epath=De sendmail programmafile $1 is niet geïnstallered op uw systeem. Waarschijnlijk is uw <a href='$2'>module configuratie</a> niet correct, of sendmail is niet geïnstalleerd.
-index_return=sendmail configuratie
-index_stop=Stop Sendmail
-index_stopmsg= Klik op deze knop om het lopende sendmail proces te stoppen. Dit zorgt ervoor dat er geen e-mail wordt afgeleverd bij gebruikers, en dat e-mail clients geen e-mail kunnen versturen via dit systeem.
-index_start=Start Sendmail
-index_startmsg=Klik deze knop om sendmail te starten met commando $1. Zolang dit niet is gedaan wordt er geen e-mail afgeleverd bij gebruikers, en kunnen e-mail clients geen mail versturen via dit systeem..
-index_version=Sendmail configuratie $1
-
-opts_title=Sendmail Opties
-opts_ecannot=Uw heeft geen rechten om de sendmail opties te bewerken
-opts_ds=Zend uitgaande e-mail via computer
-opts_direct=Lever direct af
-opts_dr=Stuur onbekende gebruikersnamen door naar host
-opts_dh=Stuur e-mail voor lokale gebruikers door naar host
-opts_local=Lever lokaal af
-opts_queuela=Maximaal belastings gemiddelde voor verzenden
-opts_refusela=MAximaal beslatings gemiddelde voor ontvangen
-opts_maxch=Max child processes
-opts_throttle=Max connections / second
-opts_minqueueage=Min time before retrying send
-opts_runsize=Maximum queue size
-opts_queuereturn=Time before giving up
-opts_queuewarn=Time before sending warning
-opts_queue=Mail queue directory
-opts_postmaster=Send error messages to
-opts_forward=User forward files
-opts_minfree=Min free disk space
-opts_maxmessage=Max message size
-opts_loglevel=Log level
-opts_mimebounce=MIME-encode bounce messages?
-opts_default=Default
-opts_save=Save and Apply
-opts_err=Failed to save options
-opts_ehost='$1' is not a valid host or domain name
-opts_einvalid='$1' is not a valid value for '$2'
-opts_blame=File security options
-opts_selected=Selected..
-opts_blocks=blocks
-opts_bytes=bytes
-opts_dmode=Delivery mode
-opts_background=Background
-opts_queue-only=Queue only
-opts_interactive=Interactive
-opts_deferred=Deferred
-opts_gecos=Accept mail for users' real names?
-opts_hops=Maximum mail hop count
-opts_daemon=SMTP port options
-
-aliases_title=Mail Aliases
-aliases_ecannot=You are not allowed to edit aliases
-aliases_addr=Address
-aliases_to=Alias to..
-aliases_type1=Address $1
-aliases_type2=Addresses in file $1
-aliases_type3=File $1
-aliases_type4=Program $1
-aliases_type5=Autoreply file $1
-aliases_type6=Apply filter file $1
-aliases_none=None
-aliases_return=alias list
-aliases_toomany=There are too many mail aliases on your system to display on this page.
-aliases_go=Find aliases matching:
-
+access_action=Action..
+access_delete=Verwijder Geselecteerde Spam Control Regels
+access_desc1=Sendmail's spam control feature allows you to prevent spam from reaching your users by rejecting mail from certain addresses, and to prevent spammers from using your system to relay mail. By default sendmail will accept mail from any address for a local user, but prevent any client or mail server from relaying mail through your system. Typically you would add spam control rules to reject mail from spammers, and rules to allow other machines on your network to relay mail through your system.
+access_desc2=Note that sendmail will by default allow mail clients running on your system to relay mail via SMTP to any destination. Thus there is no need to add the local <tt>127.0.0</tt> network to the list of those allowed to relay.
+access_ecannot=U bent niet bevoegd om spam controle te configureren.
+access_efeature=Your sendmail configuration does not have the spam control (<tt>access_db</tt>) feature enabled. <a href='$1'>Click here</a> to setup sendmail features.
+access_efile=The text file $1 from which the spam control database $2 is built does not exist. Maybe you need to modify the <a href='$3'>module configuration</a> to use the correct path.
+access_go=Find spam control rules matching:
+access_return=spam control list
+access_source=Source..
+access_title=Spam Control
+access_toomany=There are too many spam control rules on your system to display on this page.
+acl_access=Can configure spam control?
+acl_aliases=Aliases this user can edit
+acl_all=All
+acl_amax=Maximum number of aliases
+acl_any=Any address
+acl_apath=Limit files and program to directory
+acl_asame=Same as username
+acl_attach=Maximum total attachments size
+acl_atype1=Email address
+acl_atype2=Addresses in file
+acl_atype3=Write to file
+acl_atype4=Feed to program
+acl_atype5=Autoreply
+acl_atype6=Filter file
+acl_atypes=Alias types this user can edit
+acl_boxname=Show mailbox name as
+acl_boxname0=Filename
+acl_boxname1=User's real name
+acl_boxname2=Nothing
+acl_canattach=Can attach server-side files?
+acl_cgs=Can edit outgoing domains?
+acl_cws=Can edit local domains?
+acl_domains=Can configure domain mapping?
+acl_faddrs=Listed addresses
+acl_fdom=Any address @ domain
+acl_fdoms=Mailbox @ domains
+acl_flushq=Mag de mail wachtrij wissen?
+acl_from=Allowable From addresses
+acl_fromname=Real name for From address
+acl_mailers=Can configure domain routing?
+acl_mailq=Can manage mail queue?
+acl_manual=Mag handmatig files bewerken?
+acl_masq=Can configure domain masquerading?
+acl_matching=Matching
+acl_none=None
+acl_opts=Can edit sendmail options?
+acl_outgoing=Outgoing addresses this user can edit
+acl_ports=Mag netwerk poorten bewerken?
+acl_qdoms=Adres zichtbaar in wachtrij
+acl_qdomsmode=Wachtrij adres wat overeenkomt
+acl_qdomsmode0=Van: adres
+acl_qdomsmode1=Naar: adres
+acl_qdomsmode2=Ieder adres
+acl_read=Users whose mail can be read
+acl_relay=Can edit relay domains?
+acl_same=User with same name
+acl_sent=Store sent mail in mailbox
+acl_spam=Spam controle adressen die deze gebruiker kan bewerken
+acl_stop=Can start and stop sendmail?
+acl_trusts=Can edit trusted users?
+acl_unlimited=Unlimited
+acl_users=Only users
+acl_userse=All except users
+acl_usersg=Members of group
+acl_usersm=Users matching
+acl_usersu=Met UID in range
+acl_view=View only
+acl_viewdel=View and delete
+acl_virtusers=Address mappings this user can edit
+acl_vmax=Maximum number of address mappings
+acl_vsame=Starting with username@
+acl_vtype0=Return error
+acl_vtype1=To domain
+acl_vtype2=To address
+acl_vtypes=Address mapping types this user can edit
+adelete_ecannot=U bent niet bevoegd de alias $1 te verwijderen
+adelete_enone=Niets geselecteerd
+adelete_err=Mislukt om aliasen te verwijderen
+afile_desc=Use the text area below to edit the addresses in the file $1.
+afile_efile=You are not allowed to edit $1.
+afile_ewrite=Failed to write to addresses file : $1
+afile_title=Edit Address File
+afile_undo=Undo Changes
+aform_afile=Edit..
+aform_cmt=Omschrijving
+aform_create=Create Alias
aform_ecannot=You are not allowed to edit this alias
+aform_edit=Edit Alias
+aform_enabled=Enabled?
+aform_name=Address
+aform_return=alias
aform_type0=None
aform_type1=Email address
aform_type2=Addresses in file
aform_type4=Feed to program
aform_type5=Autoreply from file
aform_type6=Apply filter file
-aform_edit=Edit Alias
-aform_create=Create Alias
-aform_name=Address
-aform_enabled=Enabled?
aform_val=Alias to
-aform_afile=Edit..
-aform_return=alias
-
-afile_title=Edit Address File
-afile_desc=Use the text area below to edit the addresses in the file $1.
-afile_efile=You are not allowed to edit $1.
-afile_undo=Undo Changes
-afile_ewrite=Failed to write to addresses file : $1
-
-ffile_title=Edit Filter File
-ffile_desc=Use the form below to setup filter rules in the file $1.
-ffile_efile=You are not allowed to edit $1.
-ffile_line=If the $1 field $2 $3 then forward to $4
-ffile_from=from
-ffile_to=to
-ffile_subject=subject
-ffile_cc=CC
-ffile_body=body
-ffile_what0=doesn't match
-ffile_what1=matches
-ffile_other=Otherwise forward to $1
-ffile_err=Failed to save filter file
-ffile_ematch=Missing match
-ffile_eaction=Missing forwarding address
-
-rfile_title=Edit Autoreply File
-rfile_desc=Use the text area below to edit the autoreply message in $1. The message may contain the macros $SUBJECT, $FROM, $TO, $DATE and $BODY which will be expanded when the autoreply is activated.
-rfile_desc2=You can also set mail headers that add to or replace the defaults used in the autoreply by putting lines like:<br><tt>From: foo@bar.com</tt><br><tt>Subject: On holiday</tt><br>at the top of the message, separated from the body by a single blank line.
-rfile_efile=You are not allowed to edit $1.
-rfile_undo=Undo Changes
-
-asave_err=Failed to save alias
-asave_ecannot2=You are not allowed to edit aliases
-asave_ecannot=You are not allowed to edit this alias
-asave_emax=You are not allowed to create more than $1 aliases
+aliases_addr=Address
+aliases_delete=Verwijder Geselecteerde Aliassen
+aliases_ecannot=You are not allowed to edit aliases
+aliases_enofile=Geen alias file is gedifinieerd in uw Sendmail configuratie
+aliases_go=Find aliases matching:
+aliases_none=None
+aliases_return=alias list
+aliases_title=Mail Aliases
+aliases_to=Alias to..
+aliases_toomany=There are too many mail aliases on your system to display on this page.
+aliases_type1=Address $1
+aliases_type2=Addresses in file $1
+aliases_type3=File $1
+aliases_type4=Program $1
+aliases_type5=Autoreply file $1
+aliases_type6=Apply filter file $1
asave_eaddr='$1' is not a valid address
asave_ealready=An alias for '$1' already exists
+asave_ecannot=You are not allowed to edit this alias
+asave_ecannot2=You are not allowed to edit aliases
asave_ematch=You are only allowed to create aliases matching '$1'
+asave_emax=You are not allowed to create more than $1 aliases
+asave_err=Failed to save alias
+asave_esame=You are only allowed to create an aliases with the same name as your webmin login
asave_etype=You cannot create aliases of this type
asave_etype1='$1' is not a valid email address
asave_etype2=Addresses file '$1' is not valid or does not exist
asave_etype3='$1' is not a valid filename
asave_etype4='$1' is not a valid program or does not exist
-asave_etype5=Autoreply file '$1' is not valid
asave_etype4none=No program given
+asave_etype5=Autoreply file '$1' is not valid
asave_etype6=Filter file '$1' is not valid
-asave_esame=You are only allowed to create an aliases with the same name as your webmin login
-
-cws_title=Local Domains
-cws_ecannot=You are not allowed to edit local domains
-cws_domains=Domains handled by this server
+boxes_ecannot=You are not allowed to read email
+boxes_go=View mail for user:
+boxes_none=No mail
+boxes_return=mailboxes
+boxes_sent=Sent mail
+boxes_size=Mailbox size
+boxes_title=User Mailboxes
+boxes_toomany=There are too many users on your system to list all their mailboxes.
+boxes_user=User
+build_diff=The following changes will be made to your Sendmail configuration file ..
+build_ebuild=Failed to build configuration : $1
+build_em4=The command $1 needed for rebuilding the Sendmail configuration file was not found on your system.
+build_nodiff=Your sendmail configuration file is already up to date.
+build_ok=Yes, replace it now
+build_rusure=Are you sure you want to replace the Sendmail configuration file $1 with a new version built from $2 ?
+build_rusure2=Be aware that if you have made changes to Sendmail in the Sendmail Options page, rebuilding the config file may overwrite those changes if they have not also been made in the M4 file.
+build_title=Rebuild Sendmail Configuration
+cgs_desc=Apart from mail sent by local users, sendmail will only perform <a href='$1'>outgoing address</a> mapping for mail from hosts or domains listed in the text box to the right. Thus for an outgoing address entry to work the domain in the from address must be included in this list.
+cgs_ecannot=You are not allowed to edit outgoing domains
+cgs_ehost='$1' is not a valid host or domain name
+cgs_eip='$1' is an IP address, not a domain
+cgs_err=Failed to save outgoing domains
+cgs_header=Outgoing address domains
+cgs_title=Outgoing Domains
+compose_title=Bewerk e-mail
cws_desc1=Apart from mail to $1, sendmail will only accept for local delivery mail for domains and hostnames listed in the text box to the left. If you want your mail server to handle multiple email domains, they must all be listed on this form.
cws_desc2=Note that merely including a domain in the list is not usually enough. You must also make sure that a DNS record for the domain exists, and points to your system.
-cws_err=Failed to save local domains
+cws_domains=Domains handled by this server
+cws_ecannot=You are not allowed to edit local domains
cws_ehost='$1' is not a valid host or domain name
cws_eip='$1' is an IP address, not a domain
-
-masq_title=Domain Masquerading
-masq_ecannot=You are not allowed to configure masquerading
-masq_domain=Masquerade as domain
-masq_domains=Domains to be masqueraded
-masq_desc1=If a domain is given above, sendmail will alter the <tt>From</tt> address of all outgoing messages to appear to come from that domain. In addition, any email messages passing through your system from one of the hosts or domains listed to the left will also have their <tt>From</tt> addresses modified in the same way. Note that any domain masquerading defined here can be overriden for specific users using the <a href='$1'>Outgoing Addresses</a> page.
-masq_desc2=This feature can be useful if you want email from your system to appear to come from your domain name rather than your hostname, or if your system is the mail hub for number of other hosts running their own mailservers.
-masq_err=Failed to save domain masquerading
-masq_edomain='$1' is not a valid domain to masquerade as
-masq_ehost='$1' is not a valid host or domain name
-masq_eip='$1' is an IP address, not a domain
-
-trusts_title=Trusted Users
-trusts_ecannot=You are not allowed to edit trusted users
-trusts_users=Local users trusted by sendmail
-trusts_desc=If a local user tries to send email, sendmail will only allow the user to provide a different <tt>From:</tt> address if the user is on the list to the left. This restriction exists to prevent users from forging email with faked <tt>From:</tt> addresses origination from your system.
-trusts_err=Failed to save trusted users
-trusts_euser='$1' is not a valid user
-
-virtusers_title=Address Mapping
-virtusers_ecannot=You are not allowed to edit address mappings
-virtusers_efeature=Your sendmail configuration does not have the address mapping (<tt>virtuser</tt>) feature enabled. <a href='$1'>Click here</a> to setup sendmail features.
-virtusers_efile=The text file $1 from which the address mapping database $2 is built does not exist. Maybe you need to modify the <a href='$3'>module configuration</a> to use the correct path.
-virtusers_createfile=Or if this feature has just been enabled, <a href='$1'>click here</a> to create the file.
-virtusers_desc1=Address mappings are similar to <a href='$1'>aliases</a>, but are more suited to a system that handles multiple email domains. They can be used to redirect mail for an entire domain to one address, handle users with the same name in different domains, or map all mail from one domain to another.
-virtusers_desc2=Note that you must have an entry in the <a href='$1'>local domains</a> table for any domains used for address mapping, and there must be a DNS MX record for each domain pointing to your system.
-virtusers_for=Mail for..
-virtusers_to=Send to..
-virtusers_error=Error $1
-virtusers_domain=Domain $1
-virtusers_address=Address $1
-virtusers_return=address mapping list
-virtusers_toomany=There are too many address mappings on your system to display on this page.
-virtusers_go=Find address mappings matching:
-
-vform_edit=Edit Mapping
-vform_create=Create Mapping
-vform_for=Mail for
-vform_address=Address
-vform_domain=Domain
-vform_to=Send to
-vform_msg=message
-vform_error=Return error
-vform_err_nouser=nouser
-vform_err_nohost=nohost
-vform_err_unav=unavailable
-vform_err_temp=tempfail
-vform_err_proto=protocol
-vform_end=Move to end
-vform_ecannot=You are not allowed to edit this address mapping
-
-vsave_ecannot=You are not allowed to edit address mappings
-vsave_ecannot2=You are not allowed to edit this address mapping
-vsave_emax=You are not allowed to create more than $1 address mappings
-vsave_err=Failed to save address mapping
-vsave_efrom='$1' is not a valid address
-vsave_efromdup=Address mapping for '$1' is already defined
-vsave_edom='$1' is not a valid domain
-vsave_edomdup=Address mapping for '$1' is already defined
-vsave_ematch=The source address does not match '$1'
-vsave_esame=You are only allowed to create address mappings for your username
-vsave_ecannot3=You are not allowed to create mappings to addresses
-vsave_eaddr='$1' is not a valid address
-vsave_ecannot4=You are not allowed to create mappings to domains
-vsave_edomdom=Only a domain can be mapped to another domain
-vsave_ecannot5=You are not allowed to create mappings that return an error
-
-mailers_title=Domain Routing
-mailers_cannot=You are not allowed to edit domain routing
-mailers_edirective=Your sendmail configuration file does not have the necessary directive for domain routing.
-mailers_efeature=Your sendmail configuration does not have the domain routing (<tt>mailertable</tt>) feature enabled. <a href='$1'>Click here</a> to setup sendmail features.
-mailers_efile=The text file $1 from which the domain routing database $2 is built does not exist. Maybe you need to modify the <a href='$3'>module configuration</a> to use the correct path.
-mailers_desc1=Domain routing provides a way to define a special transfer method for mail to certain domains. This can be useful if your system is a gateway for mail servers that cannot be reached from outside your network, or if you want to force all mail for a particular domain to be routed through some other server.
-mailers_desc2=You should <b>not</b> have an entry in the <a href='$1'>local domains</a> list for any routed domains. However, you should have a DNS MX record pointing to your system for any domains that it is a gateway for.
-mailers_for=Mail for..
-mailers_delivery=Delivery
-mailers_to=Send to..
-mailers_return=domain routing list
-
-mform_edit=Edit Routing
-mform_create=Create Routing
-mform_for=Mail for
-mform_host=Host
-mform_domain=Domain
-mform_delivery=Delivery
-mform_to=Send to
-mform_ignore=Ignore MX for SMTP delivery
-mform_smtp=SMTP
-mform_esmtp=Extended SMTP
-mform_smtp8=8-bit SMTP
-mform_relay=SMTP relay
-mform_local=Local user
-mform_prog=Feed to program
-mform_uucp=UUCp
-mform_usenet=Post to USENET
-mform_fax=HylaFAX
-mform_pop=POP3
-mform_procmail=Procmail
-mform_mail11=DECnet mail11
-mform_error=Error
-mform_ecannot=You are not allowed to edit domain routing
-
-msave_ecannot=You are not allowed to edit domain routing
-msave_err=Failed to save domain routing
-msave_edomain='$1' is not a valid host or domain
-msave_edup=Domain routing for '$1' is already defined
-
-generics_title=Outgoing Addresses
+cws_err=Failed to save local domains
+cws_title=Local Domains
+ddelete_ecannot=U bent niet bevoegd om de mapping (afbeelding) te verwijderen voor $1
+ddelete_err=Mislukt om domain mappings te verwijderen
+delete_ecannot=U heeft geen rechten om e-mail van deze gebruiker te verwijderen
+delete_efnone=Geen mail geselecteerd om door te sturen
+delete_emnone=Geen e-mail geselecteerd voor markeren
+delete_emovecannot=U bent niet bevoegd de mail te verplaatsen naar de gespecificeerde gebruiker
+delete_emovenone=Geen mail geselecteerd om te verplaatssen
+delete_emoveuser=Gebruiker om mail naar te verplaatssen bestaat niet
+delete_enone=Geen e-mail om te verwijderen geselecteerd
+delete_nobutton=Niet op knop geklikt
+delete_ok=Verwijder NU
+delete_rusure=Weet U zeker dat U de $1 geselecteerde berichten van $2 wilt verwijderen? Dit kan een tijdje duren voor een grote mail file. Totdat de de verwijdering actie klaar is moet U niets doen.
+delete_rusure2=Weet U zeker dat U dit geselecteerde bericht van $2 wilt verwijderen? Dit kan een tijdje duren voor een grote mail file. Totdat de de verwijdering actie klaar is moet U niets doen.
+delete_title=Verwijder Mail
+delq_confirm=Verwijder Berichten
+delq_ecannot=You are not allowed to dequeue messages
+delq_ecannot2=u kunt dit bericht niet verwijderen
+delq_efile=invalid filename!
+delq_egone=already deleted or delivered
+delq_elocked=locked for sending
+delq_enone=No messages to delete selected
+delq_err=Failed to delete message
+delq_file=Deleting mail file $1 ..
+delq_force=Force deletion anyway
+delq_locked=File is currently locked for sending
+delq_ok=deleted ok
+delq_rusure=Weet U zeker dat U de $1 geselecteerde berichten die in de wachtrij staan wilt verwijderen?
+delq_title=Delete Message
+delq_titles=Deleting Messages
+dform_create=Create Mapping
+dform_ecannot=You are not allowed to edit domain mapping
+dform_edit=Edit Mapping
+dform_from=From domain
+dform_to=To domain
+domains_delete=Verwijder Geselecteerde Domein Mappings
+domains_desc=Domain mapping modifies the <tt>To:</tt> address of messages sent out from, relayed through or delivered to users on your system. The <tt>From:</tt> address of relayed messages or messages to local users is also modified. This can be useful if your domain name changes, and you want to change all occurrances of the old domain to the new one.
+domains_ecannot=You are not allowed to edit domain mapping
+domains_econfig=Your sendmail configuration file does not have the necessary directive for domain mapping.
+domains_efeature=Your sendmail configuration does not have the domain mapping (<tt>domaintable</tt>) feature enabled. <a href='$1'>Click here</a> to setup sendmail features.
+domains_efile=The text file $1 from which the domain mapping database $2 is built does not exist. Maybe you need to modify the <a href='$3'>module configuration</a> to use the correct path.
+domains_from=From domain..
+domains_return=domain mapping list
+domains_title=Domain Mapping
+domains_to=To domain..
+dsave_ealready=Een domein mapping voor '$1' bestaat reeds
+dsave_ecannot=You are not allowed to edit domain mapping
+dsave_edomain='$1' is not a valid domain name
+dsave_err=Failed to save domain mapping
+enew_title=Bewerk e-mail
+feat_access_db=Spam control file
+feat_domaintable=Domain Mapping
+feat_genericstable=Outgoing Addresses
+feat_mailertable=Domain Routing
+feat_virtusertable=Address Mapping
+feature_add=Add Configuration Entry
+feature_def=Definition name
+feature_defmode0=Undefine
+feature_defmode1=Set to ..
+feature_defval=Value
+feature_edef=The definition $1 already exists
+feature_edit=Edit Configuration Entry
+feature_efeat=The feature $1 already exists
+feature_emailer=The mailer $1 already exists
+feature_eostype=The OS type is already defined as $1
+feature_err=Failed to save configuration entry
+feature_feat=Feature
+feature_header=M4 configuration entry details
+feature_mailer=Mail delivery method
+feature_manual=Edit M4 File
+feature_mdesc=The page allowes you to manually edit the Sendmail M4 configuration file $1. Be careful, as no syntax checking will be done on your edits.
+feature_old=Current configuration line
+feature_ostype=Operating system type
+feature_text=Configuration line
+feature_values=Parameters
+features_add=Add new entry of type:
+features_build=Rebuild Sendmail Configuration
+features_buildmsg=Click this button to rebuild your Sendmail configuration file $1 from the M4 configuration entries listed above.
+features_desc=This page lists the relevant entries from the Sendmail M4 configuration file $1, from which the actual configuration file $2 is built.
+features_econfig=The location of the Sendmail M4 base directory and M4 config file have not been set yet in your <a href='$1'>module configuration</a>. If you have installed Sendmail from the source, these should be under the original source directory.
+features_efeatures=The Sendmail M4 configuration base directory $2 was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the <a href='$1'>module config</a> is incorrect.
+features_emc=The Sendmail M4 configuration file $2 was not found on your system. Maybe it has not been installed (common for packaged installs of Sendmail), or the <a href='$1'>module config</a> is incorrect.
+features_manual=Edit file manually
+features_move=Move
+features_return=M4 configuration
+features_title=Sendmail M4 Configuration
+features_type=Entry type
+features_type0=Other
+features_type1=Feature
+features_type2=Define
+features_type3=Undefine
+features_type4=Mailer
+features_type5=OS Type
+features_value=Line in configuration file
+ffile_body=body
+ffile_cc=CC
+ffile_desc=Use the form below to setup filter rules in the file $1.
+ffile_eaction=Missing forwarding address
+ffile_efile=You are not allowed to edit $1.
+ffile_ematch=Missing match
+ffile_err=Failed to save filter file
+ffile_from=from
+ffile_line=If the $1 field $2 $3 then forward to $4
+ffile_other=Otherwise forward to $1
+ffile_subject=subject
+ffile_title=Edit Filter File
+ffile_to=to
+ffile_what0=doesn't match
+ffile_what1=matches
+file_desc=Use the text box below to manually edit the Sendmail file $1.
+file_eaccess=You are not allowed to edit the spam control file.
+file_ealiases=You can only edit an aliases file if you have access to all aliases.
+file_ecannot=U bent niet bevoegd deze file te bewerken
+file_edit=Manually edit $1
+file_edomains=You are not allowed to edit the domain mapping file.
+file_egenerics=You can only edit the outgoing addresses file if you have access to all outgoing addresses.
+file_emailers=You are not allowed to edit the domain routing file.
+file_emode=Unknown mode!
+file_err=Failed to edit file
+file_evirtusers=You can only edit the address mappings file if you have access to all address mappings.
+file_title=Edit Sendmail File
+file_undo=Undo Changes
+flushq_desc=Forcing the attempted delivery of mail with the command $1 ..
+flushq_desc2=Forceer de geprobeerde aflevering van $1 geselecteerde berichten ..
+flushq_ecannot=U bent niet bevoegd om de mail wachtrij te wissen
+flushq_title=Flush Queue
+forward_title=E-mail doorsturen
+gdelete_ecannot=U bent niet bevoegd om de mapping voor $1 te verwijderen
+gdelete_err=Mislukt om uitgaande adres mappings te verwijderen
generics_cannot=You are not allowed to edit outgoing addresses
+generics_delete=Verwijder Geselecteerde Uitgaande Adressen
+generics_desc1=Outgoing address mapping allows you to modify the <tt>From:</tt> addresses of mail send out from your system, or through your system by other hosts on your local network. This can be useful if you are hosting multiple domains on the one system, and want mail from some users to appear to come from a different domain.
+generics_desc2=Note that you must have an entry in the <a href='$1'>outgoing domains</a> table for each domain which there are addresses you want outgoing mapping done for. Also note that outgoing address mapping does not work for mail being delivered to local users.
generics_econfig=Your sendmail configuration file does not have the necessary directive for outgoing address mapping.
generics_efeature=Your sendmail configuration does not have the outgoing address mapping (<tt>generics</tt>) feature enabled. <a href='$1'>Click here</a> to setup sendmail features.
generics_efile=The text file $1 from which the outgoing address database $2 is built does not exist. Maybe you need to modify the <a href='$3'>module configuration</a> to use the correct path.
-generics_desc1=Outgoing address mapping allows you to modify the <tt>From:</tt> addresses of mail send out from your system, or through your system by other hosts on your local network. This can be useful if you are hosting multiple domains on the one system, and want mail from some users to appear to come from a different domain.
-generics_desc2=Note that you must have an entry in the <a href='$1'>outgoing domains</a> table for each domain which there are addresses you want outgoing mapping done for. Also note that outgoing address mapping does not work for mail being delivered to local users.
generics_from=Mail from..
-generics_to=Change to..
+generics_go=Find outgoing addresses matching:
generics_return=address mapping list
+generics_title=Outgoing Addresses
+generics_to=Change to..
generics_toomany=There are too many outgoing addresses on your system to display on this page.
-generics_go=Find outgoing addresses matching:
-
-gform_edit=Edit Mapping
gform_create=Create Mapping
+gform_ecannot=You are not allowed to edit this outgoing address
+gform_edit=Edit Mapping
gform_from=Mail from
gform_to=Change to
-gform_ecannot=You are not allowed to edit this outgoing address
-
+gsave_ealready=Een uitgaande adres mapping voor '$1' bestaat reeds
gsave_ecannot=You are not allowed to edit outgoing addresses
gsave_ecannot2=You are not allowed to edit this outgoing address
-gsave_err=Failed to save outgoing address
+gsave_ecannot3=U bent niet bevoegd om dit uitgaande adres op te slaan
gsave_efrom='$1' is not a valid from address
gsave_ematch=The from address does not match '$1'
+gsave_err=Failed to save outgoing address
gsave_eto='$1' is not a valid new address
-
-cgs_title=Outgoing Domains
-cgs_ecannot=You are not allowed to edit outgoing domains
-cgs_header=Outgoing address domains
-cgs_desc=Apart from mail sent by local users, sendmail will only perform <a href='$1'>outgoing address</a> mapping for mail from hosts or domains listed in the text box to the right. Thus for an outgoing address entry to work the domain in the from address must be included in this list.
-cgs_err=Failed to save outgoing domains
-cgs_ehost='$1' is not a valid host or domain name
-cgs_eip='$1' is an IP address, not a domain
-
-domains_title=Domain Mapping
-domains_ecannot=You are not allowed to edit domain mapping
-domains_econfig=Your sendmail configuration file does not have the necessary directive for domain mapping.
-domains_efeature=Your sendmail configuration does not have the domain mapping (<tt>domaintable</tt>) feature enabled. <a href='$1'>Click here</a> to setup sendmail features.
-domains_efile=The text file $1 from which the domain mapping database $2 is built does not exist. Maybe you need to modify the <a href='$3'>module configuration</a> to use the correct path.
-domains_desc=Domain mapping modifies the <tt>To:</tt> address of messages sent out from, relayed through or delivered to users on your system. The <tt>From:</tt> address of relayed messages or messages to local users is also modified. This can be useful if your domain name changes, and you want to change all occurrances of the old domain to the new one.
-domains_from=From domain..
-domains_to=To domain..
-domains_return=domain mapping list
-
-dform_edit=Edit Mapping
-dform_create=Create Mapping
-dform_from=From domain
-dform_to=To domain
-dform_ecannot=You are not allowed to edit domain mapping
-
-dsave_ecannot=You are not allowed to edit domain mapping
-dsave_err=Failed to save domain mapping
-dsave_edomain='$1' is not a valid domain name
-
-access_title=Spam Control
-access_ecannot=You are not allowed to configure spam control
-access_efeature=Your sendmail configuration does not have the spam control (<tt>access_db</tt>) feature enabled. <a href='$1'>Click here</a> to setup sendmail features.
-access_efile=The text file $1 from which the spam control database $2 is built does not exist. Maybe you need to modify the <a href='$3'>module configuration</a> to use the correct path.
-access_desc1=Sendmail's spam control feature allows you to prevent spam from reaching your users by rejecting mail from certain addresses, and to prevent spammers from using your system to relay mail. By default sendmail will accept mail from any address for a local user, but prevent any client or mail server from relaying mail through your system. Typically you would add spam control rules to reject mail from spammers, and rules to allow other machines on your network to relay mail through your system.
-access_desc2=Note that sendmail will by default allow mail clients running on your system to relay mail via SMTP to any destination. Thus there is no need to add the local <tt>127.0.0</tt> network to the list of those allowed to relay.
-access_source=Source..
-access_action=Action..
-access_return=spam control list
-access_toomany=There are too many spam control rules on your system to display on this page.
-access_go=Find spam control rules matching:
-
-sform_edit=Edit Spam Control Rule
-sform_create=Create Spam Control Rule
-sform_source=Mail source
-sform_type0=Email Address
-sform_type1=Network
-sform_type2=User
-sform_type3=Domain
-sform_action=Action
-sform_ok=Accept
-sform_relay=Allow relaying
-sform_reject=Reject
-sform_discard=Discard silently
-sform_err=Error code
-sform_msg=Message
-sform_ecannot=You are not allowed to configure spam control
-
-ssave_ecannot=You are not allowed to configure spam control
-ssave_err=Failed to save spam control rule
-ssave_etype0='$1' is not a valid address
-ssave_etype1='$1' is not a valid network address
-ssave_etype2='$1' is not a valid username
-ssave_etype3='$1' is not a valid domain
-ssave_ecode='$1' is not a valid SMTP error code
-ssave_ealready=A spam control rule for '$1' already exists
-
-relay_title=Relay Domains
-relay_ecannot=You are not allowed to edit relay domains
-relay_eversion=Only sendmail versions 8.9 and above support the relay domains feature.
-relay_domains=Domains to which relaying is allowed
-relay_desc1=Unless allowed by the <a href='$1'>spam control</a> rules, sendmail will only permit relaying to domains listed in the text box to the left. Incoming mail messages that are not for a local user and not for one of the listed domains will be rejected.
-relay_desc2=If your system is serving as a gateway for several domains that are not directly accessible from outside your network (using the <a href='$1'>domain routing</a> feature), then all those domains should be listed here.
-relay_err=Failed to save relay domains
-relay_edomain='$1' is not a valid domain name
-
-mailq_title=Mail Queue
-mailq_count=$1 messages
-mailq_ecannot=You are not allowed to view the mail queue
-mailq_id=Mail ID
-mailq_sent=Sent
-mailq_from=From
-mailq_to=To
-mailq_size=Size
-mailq_status=Status
-mailq_cc=Cc
-mailq_subject=Subject
-mailq_unknown=Unknown
-mailq_sending=Sending
-mailq_dmsg=To view a message from the mail queue, click on its ID in the list above.
-mailq_force=To force the immediate delivery of queued of mail, <a href='$1'>click here</a>.
-mailq_none=No mail messages are currently queued for delivery
-mailq_delete=Delete selected messages
-mailq_return=mail queue
-mailq_flush=Flush Mail Queue
-mailq_flushdesc=Click this button to force the immediate delivery of all messages in the queue, and display the results.
-
-flushq_title=Flush Queue
-flushq_desc=Forcing the attempted delivery of mail with the command $1 ..
-
-delq_err=Failed to delete message
-delq_ecannot=You are not allowed to dequeue messages
-delq_locked=File is currently locked for sending
-delq_enone=No messages to delete selected
-delq_titles=Deleting Messages
-delq_file=Deleting mail file $1 ..
-delq_efile=invalid filename!
-delq_egone=already deleted or delivered
-delq_elocked=locked for sending
-delq_ok=deleted ok
-delq_title=Delete Message
-delq_force=Force deletion anyway
-
-boxes_title=User Mailboxes
-boxes_user=User
-boxes_size=Mailbox size
-boxes_none=No mail
-boxes_return=mailboxes
-boxes_sent=Sent mail
-boxes_ecannot=You are not allowed to read email
-boxes_toomany=There are too many users on your system to list all their mailboxes.
-boxes_go=View mail for user:
-
-mail_title=Gebuikers E-mail
-mail_from=Van
-mail_date=Datum
-mail_subject=Onderwerp
-mail_to=Aan
-mail_cc=Cc
+index_econfig=De sendmail config file $1 bestaat niet. Waarschijnlijk is uw <a href='$2'>module configuratie</a> incorrect.
+index_epath=De sendmail programmafile $1 is niet geïnstallered op uw systeem. Waarschijnlijk is uw <a href='$2'>module configuratie</a> niet correct, of sendmail is niet geïnstalleerd.
+index_eversion=Uw sendmail configuratiefile is niet voor de laatste versie van sendmail. Webmin ondersteunt alleen versie 8.8 en hoger.
+index_return=sendmail configuratie
+index_sendmail=Sendmail
+index_start=Start Sendmail
+index_startmsg=Klik deze knop om sendmail te starten met commando $1. Zolang dit niet is gedaan wordt er geen e-mail afgeleverd bij gebruikers, en kunnen e-mail clients geen mail versturen via dit systeem..
+index_stop=Stop Sendmail
+index_stopmsg=Klik op deze knop om het lopende sendmail proces te stoppen. Dit zorgt ervoor dat er geen e-mail wordt afgeleverd bij gebruikers, en dat e-mail clients geen e-mail kunnen versturen via dit systeem.
+index_title=Sendmail Configuratie
+index_version=Sendmail configuratie $1
+index_version2=Sendmail versie $1, config $2
+index_xversion=Sendmail versie $1
+log_access_create=Created spam control for $1
+log_access_delete=Deleted spam control for $1
+log_access_manual=Manually edited spam control file $1
+log_access_modify=Modified spam control for $1
+log_alias_create=Created alias $1
+log_alias_delete=Deleted alias $1
+log_alias_manual=Manually edited alias file $1
+log_alias_modify=Modified alias $1
+log_build=Rebuilt sendmail configuration
+log_cgs=Changed outgoing domains
+log_cws=Changed local domains
+log_delete_accesses=Verwijder $1 spam controle ingangen
+log_delete_aliases=Verwijder $1 aliasen
+log_delete_domains=Verwijder $1 domein mappings
+log_delete_generics=Verwijder $1 uitgaande adressen
+log_delete_mailers=Verwijder $1 domein routes
+log_delete_virtusers=Verwijder $1 adres mappings
+log_delmail=Deleted $1 messages from $2
+log_delmailq=Deleted mail from $1 from queue
+log_delmailqs=Deleted $1 mails from queue
+log_domain_create=Created domain mapping $1
+log_domain_delete=Deleted domain mapping $1
+log_domain_manual=Manually edited domain mapping file $1
+log_domain_modify=Modified domain mapping $1
+log_feature_create=Added M4 entry $1
+log_feature_delete=Deleted M4 entry $1
+log_feature_modify=Modified M4 entry $1
+log_feature_move=Moved M4 entry $1
+log_flushq=Flushed mail queue
+log_generic_create=Created outgoing address $1
+log_generic_delete=Deleted outgoing address $1
+log_generic_manual=Manually edited outgoing address file $1
+log_generic_modify=Modified outgoing address $1
+log_mailer_create=Created domain routing $1
+log_mailer_delete=Deleted domain routing $1
+log_mailer_manual=Manually edited domain routing file $1
+log_mailer_modify=Modified domain routing $1
+log_masq=Changed domain masquerading
+log_movemail=Verplaatst $1 berichten van $2 naar $3
+log_opts=Changed sendmail options
+log_ports=Verander netwerk poorten
+log_relay=Changed relay domains
+log_send=Sent mail to $1
+log_start=Started sendmail daemon
+log_stop=Stopped sendmail daemon
+log_trusts=Changed trusted users
+log_virtuser_create=Created address mapping $1
+log_virtuser_delete=Deleted address mapping $1
+log_virtuser_manual=Manually edited address mapping file $1
+log_virtuser_modify=Modified address mapping $1
+mail_all=Selecteer alle
mail_bcc=Bcc
-mail_pri=Prioriteit
-mail_highest=Hoogste
-mail_high=Hoog
-mail_normal=Normaal
-mail_low=Laag
-mail_lowest=Laagste
-mail_for=In $1
-mail_for2=Voor gebuiker $1
-mail_sent=In verzonden mail lijst
-mail_size=Grootte
-mail_delete=Verwijder
+mail_body=Inhoud
+mail_cc=Cc
mail_compose=Nieuw
-mail_return=gebruikers mailbox
-mail_pos=E-mail $1 tot $2 van $3
-mail_none=Het postvak bevat geen e-mail
+mail_copy=Kopieer naar:
+mail_date=Datum
+mail_delete=Verwijder
mail_ecannot=U heeft geen toestemming om de mail van deze gebruiker te lezen
-mail_all=Selecteer alle
+mail_eexists=Bericht bestaat niet langer!
+mail_euserexists=Deze Unix gebruiker bestaat niet
+mail_for=In $1
+mail_for2=Voor gebuiker $1
+mail_forward=Doorsturen
+mail_from=Van
+mail_high=Hoog
+mail_highest=Hoogste
mail_invert=Inverteer selectie
-mail_search=Zoek e-mail waar
-mail_body=Inhoud
-mail_match=is gelijk aan
-mail_ok=Zoek
-mail_nonefrom=Geen
+mail_low=Laag
+mail_lowest=Laagste
mail_mark=Markeer als:
mail_mark0=Ongelezen
mail_mark1=Gelezen
mail_mark2=Speciaal
-mail_forward=Doorsturen
+mail_match=is gelijk aan
+mail_move=Verplaats naar:
+mail_none=Het postvak bevat geen e-mail
+mail_nonefrom=Geen
+mail_normal=Normaal
+mail_ok=Zoek
+mail_pos=E-mail $1 tot $2 van $3
+mail_pri=Prioriteit
+mail_return=gebruikers mailbox
mail_rfc=Afzender regel
-
-view_title=Lees Email
+mail_search=Zoek e-mail waar
+mail_sent=In verzonden mail lijst
+mail_size=Grootte
+mail_subject=Onderwerp
+mail_title=Gebuikers E-mail
+mail_to=Aan
+mailer_local=Local Unix delivery
+mailers_cannot=You are not allowed to edit domain routing
+mailers_delete=Verwijder Geselecteerde Domein Routes
+mailers_delivery=Delivery
+mailers_desc1=Domain routing provides a way to define a special transfer method for mail to certain domains. This can be useful if your system is a gateway for mail servers that cannot be reached from outside your network, or if you want to force all mail for a particular domain to be routed through some other server.
+mailers_desc2=You should <b>not</b> have an entry in the <a href='$1'>local domains</a> list for any routed domains. However, you should have a DNS MX record pointing to your system for any domains that it is a gateway for.
+mailers_desc3=U moet ook ingangen hebben in de <a href='$1'>relay domains</a> lijst voor ieder domein
+mailers_edirective=Your sendmail configuration file does not have the necessary directive for domain routing.
+mailers_efeature=Your sendmail configuration does not have the domain routing (<tt>mailertable</tt>) feature enabled. <a href='$1'>Click here</a> to setup sendmail features.
+mailers_efile=The text file $1 from which the domain routing database $2 is built does not exist. Maybe you need to modify the <a href='$3'>module configuration</a> to use the correct path.
+mailers_for=Mail for..
+mailers_return=domain routing list
+mailers_title=Domain Routing
+mailers_to=Send to..
+mailq_cc=Cc
+mailq_count=$1 messages
+mailq_delete=Delete selected messages
+mailq_dir=Directorie
+mailq_dmsg=To view a message from the mail queue, click on its ID in the list above.
+mailq_ecannot=You are not allowed to view the mail queue
+mailq_flush=Flush Mail Queue
+mailq_flushdesc=Click this button to force the immediate delivery of all messages in the queue, and display the results.
+mailq_flushquar=Wis Wachtrij in Quarantaine
+mailq_flushquardesc=Klik op deze knop om de aflevering te forceren van de quarantiane berichten die n de wachtrij staan.
+mailq_flushsel=Wis Geselecteerde Berichten
+mailq_force=To force the immediate delivery of queued of mail, <a href='$1'>click here</a>.
+mailq_from=From
+mailq_id=Mail ID
+mailq_locked=Zelfs als ze op slot zijn
+mailq_none=No mail messages are currently queued for delivery
+mailq_quar=Quarantaine
+mailq_return=mail queue
+mailq_search=Vind wachtrij berichten waar
+mailq_sending=Sending
+mailq_sent=Sent
+mailq_size=Size
+mailq_status=Status
+mailq_subject=Subject
+mailq_title=Mail Queue
+mailq_to=To
+mailq_unknown=Unknown
+masq_desc1=If a domain is given above, sendmail will alter the <tt>From</tt> address of all outgoing messages to appear to come from that domain. In addition, any email messages passing through your system from one of the hosts or domains listed to the left will also have their <tt>From</tt> addresses modified in the same way. Note that any domain masquerading defined here can be overriden for specific users using the <a href='$1'>Outgoing Addresses</a> page.
+masq_desc2=This feature can be useful if you want email from your system to appear to come from your domain name rather than your hostname, or if your system is the mail hub for number of other hosts running their own mailservers.
+masq_domain=Masquerade as domain
+masq_domains=Domains to be masqueraded
+masq_ecannot=You are not allowed to configure masquerading
+masq_edomain='$1' is not a valid domain to masquerade as
+masq_ehost='$1' is not a valid host or domain name
+masq_eip='$1' is an IP address, not a domain
+masq_err=Failed to save domain masquerading
+masq_ndomains=Domeinen niet voor masquerade
+masq_title=Domain Masquerading
+match_=-----------------
+match_!body=Body bevat niet
+match_!cc=Cc: bevat niet
+match_!date=Date: bevat niet
+match_!from=From: bevat niet
+match_!headers=Headers die niet overeenkomen
+match_!size=Formaat is kleiner dan
+match_!status=Status komt niet overeen
+match_!subject=Subject: bevat niet
+match_!to=To: bevat niet
+match_body=Body bevat
+match_cc=Cc: bevat
+match_date=Date: bevat
+match_from=From: bevat
+match_headers=Headers komen overeen
+match_size=Formaat is groter dan
+match_status=Status komt overeen
+match_subject=Subject: bevat
+match_to=To: bevat
+mdelete_ecannot=U bent niet bevoegd de route te verwijderen voor $1
+mdelete_err=Mislukt om domein router te verwijderen
+mform_create=Create Routing
+mform_delivery=Delivery
+mform_domain2=Alle hosts in domein
+mform_domain3=Domein en al zijn hosts
+mform_ecannot=You are not allowed to edit domain routing
+mform_edit=Edit Routing
+mform_error=Error
+mform_esmtp=Extended SMTP
+mform_fax=HylaFAX
+mform_for=Mail for
+mform_host2=Host of domein
+mform_ignore=Ignore MX for SMTP delivery
+mform_local=Local user
+mform_mail11=DECnet mail11
+mform_pop=POP3
+mform_procmail=Procmail
+mform_prog=Feed to program
+mform_relay=SMTP relay
+mform_smtp=SMTP
+mform_smtp8=8-bit SMTP
+mform_to=Send to
+mform_usenet=Post to USENET
+mform_uucp=UUCp
+msave_ecannot=You are not allowed to edit domain routing
+msave_edomain='$1' is not a valid host or domain
+msave_edup=Domain routing for '$1' is already defined
+msave_err=Failed to save domain routing
+opts_background=Background
+opts_below=Hieronder ingevuld ..
+opts_blame=File security options
+opts_blocks=blocks
+opts_bytes=bytes
+opts_daemon=SMTP port options
+opts_default=Default
+opts_deferred=Deferred
+opts_dh=Stuur e-mail voor lokale gebruikers door naar host
+opts_direct=Lever direct af
+opts_dmode=Delivery mode
+opts_dr=Stuur onbekende gebruikersnamen door naar host
+opts_ds=Zend uitgaande e-mail via computer
+opts_ecannot=Uw heeft geen rechten om de sendmail opties te bewerken
+opts_ehost='$1' is not a valid host or domain name
+opts_einvalid='$1' is not a valid value for '$2'
+opts_err=Failed to save options
+opts_forward=User forward files
+opts_gecos=Accept mail for users' real names?
+opts_hops=Maximum mail hop count
+opts_host=Hostnaam
+opts_interactive=Interactive
+opts_local=Lever lokaal af
+opts_loglevel=Log level
+opts_maxbad=Maximum slechte ontvangers
+opts_maxch=Max child processes
+opts_maxmessage=Max message size
+opts_maxrcpt=Maximum ontvangers per bericht
+opts_mimebounce=MIME-encode bounce messages?
+opts_minfree=Min free disk space
+opts_minqueueage=Min time before retrying send
+opts_postmaster=Send error messages to
+opts_priority=Prioriteit
+opts_qso=Sorteer mail wachtrij met
+opts_queue=Mail queue directory
+opts_queue-only=Queue only
+opts_queuela=Maximaal belastings gemiddelde voor verzenden
+opts_queuereturn=Time before giving up
+opts_queuewarn=Time before sending warning
+opts_refusela=MAximaal beslatings gemiddelde voor ontvangen
+opts_runsize=Maximum queue size
+opts_save=Save and Apply
+opts_selected=Selected..
+opts_throttle=Max connections / second
+opts_time=Ontvangen tijd
+opts_title=Sendmail Opties
+ports_addr=Luister op adres
+ports_all=Alles
+ports_def0=Accepteer email alleen op onderstaande poorten ..
+ports_def1=Accepteer email op poort 25 en alle adressen
+ports_eaddress=Ontbrekende of ongeldig IP adres in rij $1
+ports_ecannot=U bent niet bevoegd netwerk poorten te beheren
+ports_eclash=Gedupliceerde poort naam in rij $1
+ports_ename=Ongeldige poort naam in rij $1
+ports_eport=Ontbrekende of ongeldige poort aantal in rij $1
+ports_err=Mislukt om netwerk poorten op te slaan
+ports_ip=IP
+ports_mod_C=Voer geen hostnaam canonificatie uit
+ports_mod_E=Laat ETRN niet toe
+ports_mod_a=SMTP authenticatie is nodig
+ports_mod_b=Gebruik zelfde interface voor uitgaande email
+ports_mod_c=Uitvoeren hostnaam canonificatie
+ports_mod_f=Volledig gekwalificeerde hostnaam nodig
+ports_mod_h=Gebruik naam van interface voor HELO (HALLO)
+ports_name=Poort naam
+ports_opts=Poort opties
+ports_port=Luister op poort
+ports_title=Netwerk Poorten
+relay_desc1=Unless allowed by the <a href='$1'>spam control</a> rules, sendmail will only permit relaying to domains listed in the text box to the left. Incoming mail messages that are not for a local user and not for one of the listed domains will be rejected.
+relay_desc2=If your system is serving as a gateway for several domains that are not directly accessible from outside your network (using the <a href='$1'>domain routing</a> feature), then all those domains should be listed here.
+relay_domains=Domains to which relaying is allowed
+relay_ecannot=You are not allowed to edit relay domains
+relay_edomain='$1' is not a valid domain name
+relay_err=Failed to save relay domains
+relay_eversion=Only sendmail versions 8.9 and above support the relay domains feature.
+relay_title=Relay Domains
+reply_attach=Doorgestuurde attachments
+reply_attach2=Client en server Attachments
+reply_body=Berichten tekst
+reply_ecannot=U heeft geen rechten om e-mail namens deze gebruiker te versturen
+reply_headers=E-mail headers
+reply_mailforward=Doorgestuurde e-mails
+reply_send=E-mail verzenden
+reply_title=Beantwoord e-mail
+restart_ekill=Mislukt signaal te sturen naar sendmail proces : $1
+restart_epids=Kon geen sendmail processen vinden
+rfile_auto=Automatisch (gebaseerd op ontvangers adres)
+rfile_default=Standaard (1 uur)
+rfile_desc=Use the text area below to edit the autoreply message in $1. The message may contain the macros $SUBJECT, $FROM, $TO, $DATE and $BODY which will be expanded when the autoreply is activated.
+rfile_desc2=You can also set mail headers that add to or replace the defaults used in the autoreply by putting lines like:<br><tt>From: foo@bar.com</tt><br><tt>Subject: On holiday</tt><br>at the top of the message, separated from the body by a single blank line.
+rfile_efile=You are not allowed to edit $1.
+rfile_efrom=Ontbrekend Van: adres
+rfile_eperiod=Ontbrekende of ongeldige aantal seconden tussen antwoorden
+rfile_ereplies=Ontbrekend antwoord tracking log file
+rfile_file=Ja, gebruik log file
+rfile_from=Van: adres voor antwoord
+rfile_fromdesc=Van: indien mogelijk altijd een adres specificeren, omdat de automatische methoden niet betrouwbaar is.
+rfile_no_autoreply=Stuur geen auto-antwoorden naar
+rfile_no_regexp=Stuur geen auto-antwoorden naar berichten die met regexps overeenkomen
+rfile_none=Nee
+rfile_period=Minimum interval tussen antwoorden
+rfile_replies=Traceer antwoorden om mail loops te voorkomen?
+rfile_secs=Seconden
+rfile_title=Edit Autoreply File
+rfile_undo=Undo Changes
+sdelete_ecannot=U bent niet bevoegd om de rule te verwijderen voor $1
+sdelete_err=Mislukt om spam controle rules te verwijderen
+search_all=In alle folders
+search_eboolean=Boolean zoeken met gebruik van 'en' en 'of' worden niet ondersteund
+search_ecannot=U heeft geen rechten om de e-mail van deze gebruiker te doorzoeken
+search_efield=U moet het soort zoeken selecteren.
+search_ematch=Zoektekst is verplicht.
+search_enone=Geen zoek criteria ingevuld
+search_ewhat=Er komt geen tekst overeen voor rij $1
+search_local=In locale folders
+search_none=Geen berichten gevonden.
+search_results2=$1 e-mail berichten bevatten $2 ..
+search_results3=$1 e-mail berichten bevatten niet $2 ..
+search_results4=$1 mail berichten komen overeen met uw zoeken ..
+search_title=Zoek resultaten
+searchq_none=Geen wachtrij berichten gevonden.
+searchq_title=Wachtrij Berichten Resultaten
+send_eattach=Bijlage(n) mogen maximaal $1 kB groot zijn.
+send_ecannot=U heeft geen rechten om e-mail namens deze gebruiker te versturen
+send_efile=File $1 voor bijlage niet gevonden
+send_efrom=Afzenderadres ontbreekt
+send_epath=Sendmail programma $1 niet gevonden.
+send_eperms=Gebruiker $1 heeft geen leesrechten voor $2
+send_eperms2=U heeft geen rechten om file $1 te verzenden
+send_err=E-mail NIET verzonden
+send_esmtp=SMTP commando $1 faalt : $2
+send_eto=Ontvangeradres ontbreekt
+send_ok=E-mail correct verzonden aan $1
+send_title=E-mail verzonden
+sform_action=Action
+sform_create=Create Spam Control Rule
+sform_discard=Discard silently
+sform_ecannot=U bent niet bevoegd om deze spam controle rule te bewerken
+sform_edit=Edit Spam Control Rule
+sform_err=Error code
+sform_msg=Message
+sform_ok=Accept
+sform_reject=Reject
+sform_relay=Allow relaying
+sform_source=Mail source
+sform_tag=Overeenkomend met
+sform_tag_=Alles
+sform_tag_connect=Verbindings informatie
+sform_tag_from=Van: adres
+sform_tag_spam=Spam informatie
+sform_tag_to=Naar: adres
+sform_type0=Email Address
+sform_type1=Network
+sform_type2=User
+sform_type3=Domein
+ssave_ealready=A spam control rule for '$1' already exists
+ssave_ecannot2=U bent niet bevoegd deze spam control rule op te slaan
+ssave_ecode='$1' is not a valid SMTP error code
+ssave_err=Failed to save spam control rule
+ssave_etype0='$1' is not a valid address
+ssave_etype1='$1' is not a valid network address
+ssave_etype2='$1' is not a valid username
+ssave_etype3='$1' is not a valid domain
+start_ecannot=U bent niet bevoegd om sendmail te starten
+start_err=Mislukt om sendmail te starten
+stop_ecannot=U bent niet bevoegd om sendmail te stoppen
+stop_epid=Sendmail lijkt niet te werken
+stop_err=Mislukt om sendmail te stoppen
+trusts_desc=If a local user tries to send email, sendmail will only allow the user to provide a different <tt>From:</tt> address if the user is on the list to the left. This restriction exists to prevent users from forging email with faked <tt>From:</tt> addresses origination from your system.
+trusts_ecannot=You are not allowed to edit trusted users
+trusts_err=Failed to save trusted users
+trusts_euser='$1' is not a valid user
+trusts_title=Trusted Users
+trusts_users=Local users trusted by sendmail
+vdelete_ecannot=U bent niet bevoegd om mapping voor $1 te verwijderen
+vdelete_err=Mislukt om adres mappings te verwijderen
+vform_address=Address
+vform_cmt=Omschrijving
+vform_create=Create Mapping
+vform_domain=Domein
+vform_ecannot=You are not allowed to edit this address mapping
+vform_edit=Edit Mapping
+vform_end=Move to end
+vform_err_nohost=nohost
+vform_err_nouser=nouser
+vform_err_protocol=Protocol fout
+vform_err_tempfail=Tijdelijke fout
+vform_err_unavailable=Onbeschikbaar
+vform_error=Return error
+vform_for=Mail for
+vform_msg=message
+vform_to=Send to
+view_allheaders=Bekijk alle headers
+view_attach=Attachments
+view_body=Berichten tekst
+view_delete=Verwijderen
view_desc=E-mail $1 in $2
view_desc2=E-mail $1 voor gebruiker $2
view_desc3=E-mail $1
-view_sent=E-mail $1 in verzonden e-mail lijst
-view_qdesc=E-mail $1 in rij geplaatst
-view_headers=mail headers
-view_allheaders=Bekijk alle headers
-view_noheaders=Bekijk standaard headers
-view_attach=Attachments
-view_reply=Beantwoorden
-view_reply2=Beantwoorden aan allen
+view_ecannot=U heeft geen rechten om e-mail van deze gebruiker te lezen
+view_egone=Dit bericht bestaat niet langer
view_enew=Bewerk als nieuw
+view_flush=Wis
view_forward=Doorsturen
-view_delete=Verwijderen
-view_strip=Verwijder Attachments
-view_ecannot=U heeft geen rechten om e-mail van deze gebruiker te lezen
+view_headers=mail headers
view_mark=Markeer e-mail als:
view_mark0=Ongelezen
view_mark1=Gelezen
view_mark2=Speciaal
+view_noheaders=Bekijk standaard headers
+view_print=Print
+view_qdesc=E-mail $1 in rij geplaatst
+view_reply=Beantwoorden
+view_reply2=Beantwoorden aan allen
view_return=originele e-mail
+view_sent=E-mail $1 in verzonden e-mail lijst
+view_strip=Verwijder Attachments
view_sub=E-mail Bijlage
-
-compose_title=Bewerk e-mail
-reply_title=Beantwoord e-mail
-forward_title=E-mail doorsturen
-enew_title=Bewerk e-mail
-reply_headers=E-mail headers
-reply_attach=Doorgestuurde attachments
-reply_mailforward=Doorgestuurde e-mails
-reply_attach2=Client en server Attachments
-reply_send=E-mail verzenden
-reply_ecannot=U heeft geen rechten om e-mail namens deze gebruiker te versturen
-
-send_err=E-mail NIET verzonden
-send_eto=Ontvangeradres ontbreekt
-send_efrom=Afzenderadres ontbreekt
-send_title=E-mail verzonden
-send_ok=E-mail correct verzonden aan $1
-send_ecannot=U heeft geen rechten om e-mail namens deze gebruiker te versturen
-send_esmtp=SMTP commando $1 faalt : $2
-send_efile=File $1 voor bijlage niet gevonden
-send_eattach=Bijlage(n) mogen maximaal $1 kB groot zijn.
-send_eperms=Gebruiker $1 heeft geen leesrechten voor $2
-send_eperms2= U heeft geen rechten om file $1 te verzenden
-send_epath=Sendmail programma $1 niet gevonden.
-
-delete_ecannot=U heeft geen rechten om e-mail van deze gebruiker te verwijderen
-delete_enone=Geen e-mail om te verwijderen geselecteerd
-delete_emnone=Geen e-mail geselecteerd voor markeren
-
-search_title=Zoek resultaten
-search_ecannot=U heeft geen rechten om de e-mail van deze gebruiker te doorzoeken
-search_ematch=Zoektekst is verplicht.
-search_none=Geen berichten gevonden.
-search_results2=$1 e-mail berichten bevatten $2 ..
-search_results3=$1 e-mail berichten bevatten niet $2 ..
-
-file_title=Edit Sendmail File
-file_desc=Use the text box below to manually edit the Sendmail file $1.
-file_undo=Undo Changes
-file_edit=Manually edit $1
-file_ealiases=You can only edit an aliases file if you have access to all aliases.
-file_evirtusers=You can only edit the address mappings file if you have access to all address mappings.
-file_emailers=You are not allowed to edit the domain routing file.
-file_egenerics=You can only edit the outgoing addresses file if you have access to all outgoing addresses.
-file_edomains=You are not allowed to edit the domain mapping file.
-file_eaccess=You are not allowed to edit the spam control file.
-file_emode=Unknown mode!
-file_err=Failed to edit file
-
-acl_opts=Can edit sendmail options?
-acl_cws=Can edit local domains?
-acl_masq=Can configure domain masquerading?
-acl_trusts=Can edit trusted users?
-acl_cgs=Can edit outgoing domains?
-acl_relay=Can edit relay domains?
-acl_mailers=Can configure domain routing?
-acl_access=Can configure spam control?
-acl_domains=Can configure domain mapping?
-acl_stop=Can start and stop sendmail?
-acl_mailq=Can manage mail queue?
-acl_viewdel=View and delete
-acl_view=View only
-acl_virtusers=Address mappings this user can edit
-acl_none=None
-acl_same=User with same name
-acl_all=All
-acl_vsame=Starting with username@
-acl_matching=Matching
-acl_vtypes=Address mapping types this user can edit
-acl_vtype0=Return error
-acl_vtype1=To domain
-acl_vtype2=To address
-acl_vmax=Maximum number of address mappings
-acl_unlimited=Unlimited
-acl_aliases=Aliases this user can edit
-acl_atypes=Alias types this user can edit
-acl_atype1=Email address
-acl_atype2=Addresses in file
-acl_atype3=Write to file
-acl_atype4=Feed to program
-acl_atype5=Autoreply
-acl_atype6=Filter file
-acl_amax=Maximum number of aliases
-acl_outgoing=Outgoing addresses this user can edit
-acl_read=Users whose mail can be read
-acl_users=Only users
-acl_userse=All except users
-acl_usersg=Members of group
-acl_from=Allowable From addresses
-acl_any=Any address
-acl_fdoms=Mailbox @ domains
-acl_faddrs=Listed addresses
-acl_fdom=Any address @ domain
-acl_fromname=Real name for From address
-acl_apath=Limit files and program to directory
-acl_attach=Maximum total attachments size
-acl_sent=Store sent mail in mailbox
-acl_canattach=Can attach server-side files?
-acl_boxname=Show mailbox name as
-acl_boxname0=Filename
-acl_boxname1=User's real name
-acl_boxname2=Nothing
-acl_usersm=Users matching
-acl_asame=Same as username
-
-log_opts=Changed sendmail options
-log_alias_create=Created alias $1
-log_alias_modify=Modified alias $1
-log_alias_delete=Deleted alias $1
-log_alias_manual=Manually edited alias file $1
-log_cws=Changed local domains
-log_masq=Changed domain masquerading
-log_trusts=Changed trusted users
-log_virtuser_create=Created address mapping $1
-log_virtuser_modify=Modified address mapping $1
-log_virtuser_delete=Deleted address mapping $1
-log_virtuser_manual=Manually edited address mapping file $1
-log_mailer_create=Created domain routing $1
-log_mailer_modify=Modified domain routing $1
-log_mailer_delete=Deleted domain routing $1
-log_mailer_manual=Manually edited domain routing file $1
-log_generic_create=Created outgoing address $1
-log_generic_modify=Modified outgoing address $1
-log_generic_delete=Deleted outgoing address $1
-log_generic_manual=Manually edited outgoing address file $1
-log_cgs=Changed outgoing domains
-log_domain_create=Created domain mapping $1
-log_domain_modify=Modified domain mapping $1
-log_domain_delete=Deleted domain mapping $1
-log_domain_manual=Manually edited domain mapping file $1
-log_access_create=Created spam control for $1
-log_access_modify=Modified spam control for $1
-log_access_delete=Deleted spam control for $1
-log_access_manual=Manually edited spam control file $1
-log_relay=Changed relay domains
-log_flushq=Flushed mail queue
-log_delmailq=Deleted mail from $1 from queue
-log_delmailqs=Deleted $1 mails from queue
-log_stop=Stopped sendmail daemon
-log_start=Started sendmail daemon
-log_delmail=Deleted $1 messages from $2
-log_send=Sent mail to $1
-log_feature_create=Added M4 entry $1
-log_feature_modify=Modified M4 entry $1
-log_feature_delete=Deleted M4 entry $1
-log_feature_move=Moved M4 entry $1
-log_build=Rebuilt sendmail configuration
-
-match_from=From: bevat
-match_subject=Subject: bevat
-match_to=To: bevat
-match_cc=Cc: bevat
-match_date=Date: bevat
-match_body=Body bevat
-match_size=Formaat is groter dan
-match_!from=From: bevat niet
-match_!subject=Subject: bevat niet
-match_!to=To: bevat niet
-match_!cc=Cc: bevat niet
-match_!date=Date: bevat niet
-match_!body=Body bevat niet
-match_!size=Formaat is kleiner dan
-
-features_title=Sendmail M4 Configuration
-features_desc=This page lists the relevant entries from the Sendmail M4 configuration file $1, from which the actual configuration file $2 is built.
-features_type=Entry type
-features_value=Line in configuration file
-features_type0=Other
-features_type1=Feature
-features_type2=Define
-features_type3=Undefine
-features_type4=Mailer
-features_type5=OS Type
-features_add=Add new entry of type:
-features_build=Rebuild Sendmail Configuration
-features_buildmsg=Click this button to rebuild your Sendmail configuration file $1 from the M4 configuration entries listed above.
-features_return=M4 configuration
-features_emc=The Sendmail M4 configuration file $2 was not found on your system. Maybe it has not been installed (common for packaged installs of Sendmail), or the <a href='$1'>module config</a> is incorrect.
-features_efeatures=The Sendmail M4 configuration base directory $2 was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the <a href='$1'>module config</a> is incorrect.
-features_econfig=The location of the Sendmail M4 base directory and M4 config file have not been set yet in your <a href='$1'>module configuration</a>. If you have installed Sendmail from the source, these should be under the original source directory.
-features_move=Move
-features_manual=Edit file manually
-
-feature_add=Add Configuration Entry
-feature_edit=Edit Configuration Entry
-feature_header=M4 configuration entry details
-feature_text=Configuration line
-feature_feat=Feature
-feature_values=Parameters
-feature_def=Definition name
-feature_defval=Value
-feature_defmode1=Set to ..
-feature_defmode0=Undefine
-feature_mailer=Mail delivery method
-feature_ostype=Operating system type
-feature_old=Current configuration line
-feature_err=Failed to save configuration entry
-feature_efeat=The feature $1 already exists
-feature_edef=The definition $1 already exists
-feature_emailer=The mailer $1 already exists
-feature_eostype=The OS type is already defined as $1
-feature_manual=Edit M4 File
-feature_mdesc=The page allowes you to manually edit the Sendmail M4 configuration file $1. Be careful, as no syntax checking will be done on your edits.
-
-feat_access_db=Spam control file
-feat_virtusertable=Address Mapping
-feat_mailertable=Domain Routing
-feat_genericstable=Outgoing Addresses
-feat_domaintable=Domain Mapping
-
-mailer_local=Local Unix delivery
-
-build_title=Rebuild Sendmail Configuration
-build_em4=The command $1 needed for rebuilding the Sendmail configuration file was not found on your system.
-build_ebuild=Failed to build configuration : $1
-build_rusure=Are you sure you want to replace the Sendmail configuration file $1 with a new version built from $2 ?
-build_rusure2=Be aware that if you have made changes to Sendmail in the Sendmail Options page, rebuilding the config file may overwrite those changes if they have not also been made in the M4 file.
-build_ok=Yes, replace it now
-build_diff=The following changes will be made to your Sendmail configuration file ..
-build_nodiff=Your sendmail configuration file is already up to date.
-
+view_title=Lees Email
+virtusers_address=Address $1
+virtusers_cmt=Omschrijving
+virtusers_createfile=Or if this feature has just been enabled, <a href='$1'>click here</a> to create the file.
+virtusers_delete=Verwijder Geselecteerde Adres Mappings
+virtusers_desc1=Address mappings are similar to <a href='$1'>aliases</a>, but are more suited to a system that handles multiple email domains. They can be used to redirect mail for an entire domain to one address, handle users with the same name in different domains, or map all mail from one domain to another.
+virtusers_desc2=Note that you must have an entry in the <a href='$1'>local domains</a> table for any domains used for address mapping, and there must be a DNS MX record for each domain pointing to your system.
+virtusers_domain=Domain $1
+virtusers_ecannot=You are not allowed to edit address mappings
+virtusers_efeature=Your sendmail configuration does not have the address mapping (<tt>virtuser</tt>) feature enabled. <a href='$1'>Click here</a> to setup sendmail features.
+virtusers_efile=The text file $1 from which the address mapping database $2 is built does not exist. Maybe you need to modify the <a href='$3'>module configuration</a> to use the correct path.
+virtusers_error=Error $1
+virtusers_for=Mail for..
+virtusers_go=Find address mappings matching:
+virtusers_return=address mapping list
+virtusers_title=Address Mapping
+virtusers_to=Send to..
+virtusers_toomany=There are too many address mappings on your system to display on this page.
+vsave_eaddr='$1' is not a valid address
+vsave_ecannot=You are not allowed to edit address mappings
+vsave_ecannot2=You are not allowed to edit this address mapping
+vsave_ecannot3=You are not allowed to create mappings to addresses
+vsave_ecannot4=You are not allowed to create mappings to domains
+vsave_ecannot5=You are not allowed to create mappings that return an error
+vsave_edom='$1' is not a valid domain
+vsave_edomdom=Only a domain can be mapped to another domain
+vsave_edomdup=Address mapping for '$1' is already defined
+vsave_efrom='$1' is not a valid address
+vsave_efromdup=Address mapping for '$1' is already defined
+vsave_ematch=The source address does not match '$1'
+vsave_emax=You are not allowed to create more than $1 address mappings
+vsave_err=Failed to save address mapping
+vsave_esame=You are only allowed to create address mappings for your username
projects / webmin.git / commitdiff