--- /dev/null
+/***********************************************************************
+ *
+ * Copyright (c) 2006-2007 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * <:label-BRCM:2011:DUAL/GPL:standard
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as published by
+ * the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+ * writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+:>
+ *
+ ************************************************************************/
+
+#ifndef __CMS_PARAMS_H__
+#define __CMS_PARAMS_H__
+
+/*!\file cms_params.h
+ * \brief Header file containing customizable or board/hardware dependent
+ * parameters for the the CPE Management System (CMS). Note that
+ * other customizable parameters are modified via make menuconfig.
+ */
+
+
+/** Config file version.
+ *
+ */
+#define CMS_CONFIG_FILE_VERSION "3.0"
+
+
+/** Number of spaces to indent each line in the config file.
+ *
+ */
+#define CMS_CONFIG_FILE_INDENT 2
+
+
+/** Address where the shared memory region is attached.
+ *
+ * Every process must attach to the shared memory at the same address
+ * because the data structures inside the shared memory region contain
+ * pointers to other areas in the shared memory.
+ */
+#define MDM_SHM_ATTACH_ADDR 0x58800000
+
+
+/** Base amount of shared memory to allocate.
+ *
+ */
+#define MDM_SHM_BASE_SIZE (160 * 1024)
+
+
+/** Amount of shared memory to allocate if WLAN feature is enabled.
+ *
+ */
+#define MDM_SHM_WLAN_EXTRA (128 * 1024)
+
+
+/** Amount of shared memory to allocate if VOIP feature is enabled.
+ *
+ */
+#define MDM_SHM_VOIP_EXTRA (128 * 1024)
+
+
+/** Amount of shared memory to allocate if GPON feature is enabled.
+ *
+ */
+#define MDM_SHM_GPON_EXTRA (128 * 1024)
+
+/** Amount of shared memory to allocate if extra large DSL data is enabled.
+ *
+ */
+#define MDM_SHM_DSL_BIG_DATA_EXTRA (256 * 1024)
+
+/** The "key" to use when requesting a semaphore from the Linux OS.
+ *
+ * This is used to implement low level MDM transation locks.
+ * The only time this will need to be modified is when other code
+ * is using the same key.
+ */
+#define MDM_LOCK_SEMAPHORE_KEY 0x5ed7
+
+
+/** This is the Unix Domain Socket address for communications with smd used
+ * by the messaging library.
+ *
+ * Note two different addresses are defined, one for modem and one for DESKTOP_LINUX testing.
+ * It is highly unlikely that this needs to be changed.
+ */
+#ifdef DESKTOP_LINUX
+#define SMD_MESSAGE_ADDR "/var/tmp/smd_messaging_server_addr"
+#else
+#define SMD_MESSAGE_ADDR "/var/smd_messaging_server_addr"
+#endif
+
+
+/** This is the number of fully connected connections that can be queued
+ * up at the SMD message server socket.
+ *
+ * It is highly unlikely that this needs to be changed.
+ */
+#define SMD_MESSAGE_BACKLOG 3
+
+
+/** Special hack for the smd dynamic launch service, when it launches a server app, the
+ * server app will find its server fd at this number.
+ *
+ * It is highly unlikely that this needs to be changed.
+ */
+#define CMS_DYNAMIC_LAUNCH_SERVER_FD 3
+
+
+
+/** This is the port ftpd listens on.
+ *
+ * Note two different ports are defined, one for modem and one for DESKTOP_LINUX testing.
+ * It is highly unlikely that this needs to be changed.
+ */
+#ifdef DESKTOP_LINUX
+#define FTPD_PORT 44421
+#else
+#define FTPD_PORT 21
+#endif
+
+
+/** This is the port tftpd listens on.
+ *
+ * Note two different ports are defined, one for modem and one for DESKTOP_LINUX testing.
+ * It is highly unlikely that this needs to be changed.
+ */
+#ifdef DESKTOP_LINUX
+#define TFTPD_PORT 44469
+#else
+#define TFTPD_PORT 69
+#endif
+
+
+/** This is the port sshd listens on.
+ *
+ * Note two different ports are defined, one for modem and one for DESKTOP_LINUX testing.
+ * It is highly unlikely that this needs to be changed.
+ */
+#ifdef DESKTOP_LINUX
+#define SSHD_PORT 44422
+#else
+#define SSHD_PORT 22
+#endif
+
+
+/** The amount of idle time, in seconds, before sshd exits.
+ *
+ * Make this relatively long because the user might be configuring something,
+ * then gets confused and have to look up some manual.
+ * If 0, then no timeout.
+ */
+#define SSHD_EXIT_ON_IDLE_TIMEOUT 600
+
+
+/** This is the port telnetd listens on.
+ *
+ * Note two different ports are defined, one for modem and one for DESKTOP_LINUX testing.
+ * It is highly unlikely that this needs to be changed.
+ */
+#ifdef DESKTOP_LINUX
+#define TELNETD_PORT 44423
+#else
+#define TELNETD_PORT 23
+#endif
+
+
+/** The amount of idle time, in seconds, before telnetd exits.
+ *
+ * Make this relatively long because the user might be configuring something,
+ * then gets confused and have to look up some manual.
+ * If 0, then no timeout.
+ */
+#define TELNETD_EXIT_ON_IDLE_TIMEOUT 600
+
+
+/** This is the port httpd listens on.
+ *
+ * Note two different ports are defined, one for modem and one for DESKTOP_LINUX testing.
+ * It is highly unlikely that this needs to be changed.
+ */
+#ifdef DESKTOP_LINUX // __\14MTS__, Richard Huang
+#define HTTPD_PORT 44480
+#else
+#ifdef SUPPORT_HTTPD_SSL
+#define HTTPD_PORT_SSL 443
+#endif
+#define HTTPD_PORT 80
+#endif
+
+
+/** The amount of idle time, in seconds, before httpd exits.
+ *
+ * Make this relatively long because the user might be configuring something,
+ * then gets confused and have to look up some manual.
+ */
+#define HTTPD_EXIT_ON_IDLE_TIMEOUT 600
+
+
+/** The amount of idle time, in seconds, before consoled exits.
+ *
+ * Make this relatively long because the user might be configuring something,
+ * then gets confused and have to look up some manual.
+ * If 0, then no timeout.
+ */
+#define CONSOLED_EXIT_ON_IDLE_TIMEOUT 600
+
+
+/** This is the port snmpd listens on.
+ *
+ * Note two different ports are defined, one for modem and one for DESKTOP_LINUX testing.
+ * It is highly unlikely that this needs to be changed.
+ */
+#ifdef DESKTOP_LINUX
+#define SNMPD_PORT 44161
+#else
+#define SNMPD_PORT 161
+#endif
+
+/** This is the port tr64c listens on.
+* LGD_TODO: Due to the time limit, it still have one DESKTOP_LINUX version TR64C,
+* in the future will add it.
+*/
+#define TR64C_HTTP_CONN_PORT 49431
+
+
+/** This is the port tr69c listens on for connection requests from the ACS.
+ *
+ */
+#define TR69C_CONN_REQ_PORT 30005
+
+
+/** This is the path part of the URL for tr69c connection requests from the ACS.
+ *
+ */
+#ifdef BUILD_EIRCOM_CUSTOMIZATION
+#define TR69C_CONN_REQ_PATH "/tr069"
+#else
+#define TR69C_CONN_REQ_PATH "/"
+#endif
+
+/** The amount of idle time, in seconds, before tr69c exits.
+ *
+ * This value does not need to be very large because the ACS is usually running
+ * a script so it will do all the actions it needs back-to-back and then be
+ * completely done. So if we see no more requests from the ACS for 30 seconds,
+ * that probably means the ACS is completely done. However, if response time
+ * is very important, and you do not want the tr69c client to exit, then you
+ * can set this to a very large value (e.g. 2160356, which is one year).
+ */
+#define TR69C_EXIT_ON_IDLE_TIMEOUT 30
+
+
+/** Maximum number of Layer 2 bridges supported.
+ *
+ * If this value is changed, be sure to also modify the default value in
+ * the data model.
+ */
+#define MAX_LAYER2_BRIDGES 16
+
+
+/** Maximum depth of objects in the Data Model that we can support.
+ * If the data model has a greater actual depth than what is defined here,
+ * cmsMdm_init() will fail.
+ */
+#define MAX_MDM_INSTANCE_DEPTH 6
+
+
+/** Maximum length of a parameter name in the Data Model that we can support.
+ * If the data model has a greater actual param name length than what is defined here,
+ * cmsMdm_init() will fail.
+ */
+#define MAX_MDM_PARAM_NAME_LENGTH 55
+
+/** DNS Probing parameters for both dnsprobe and dproxy. They probe every
+ * 30 seconds. Timeout is 3 seconds and only retry 2 more times. */
+#if 1//__MSTC__,kenny, Reduce waiting time for switch DNS Server
+#define DNS_PROBE_INTERVAL 10
+#else
+#define DNS_PROBE_INTERVAL 30
+#endif
+#define DNS_PROBE_TIMEOUT 3
+#define DNS_PROBE_MAX_TRY 3
+
+#endif /* __CMS_PARAMS_H__ */
projects / firmware_extractor.git / blobdiff