<node name="/org/freedesktop/NetworkManager/Settings" xmlns:tp="http://telepathy.freedesktop.org/wiki/DbusSpec#extensions-v0">
<interface name="org.freedesktop.NetworkManager.Settings">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
The Settings interface allows clients to view and administrate the connections stored and used by NetworkManager.
- </tp:docstring>
+ " />
<method name="ListConnections">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
List the saved network connections known to NetworkManager.
- </tp:docstring>
+ " />
<arg name="connections" type="ao" direction="out">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
List of connections.
- </tp:docstring>
+ " />
</arg>
</method>
<method name="GetConnectionByUuid">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Retrieve the object path of a connection, given that connection's UUID.
- </tp:docstring>
+ " />
<arg name="uuid" type="s" direction="in">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
The UUID to find the connection object path for.
- </tp:docstring>
+ " />
</arg>
<arg name="connection" type="o" direction="out">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
The connection's object path.
- </tp:docstring>
+ " />
</arg>
</method>
<method name="AddConnection">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Add new connection and save it to disk. This operation does not start
the network connection unless (1) device is idle and able to connect to
the network described by the new connection, and (2) the connection
is allowed to be started automatically.
- </tp:docstring>
+ " />
<arg name="connection" type="a{sa{sv}}" direction="in">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Connection settings and properties.
- </tp:docstring>
+ " />
</arg>
<arg name="path" type="o" direction="out">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Object path of the new connection that was just added.
- </tp:docstring>
+ " />
</arg>
</method>
<method name="AddConnectionUnsaved">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Add new connection but do not save it to disk immediately. This
operation does not start the network connection unless (1) device is
idle and able to connect to the network described by the new connection,
to disk. Note that unsaved changes will be lost if the
connection is reloaded from disk (either automatically on file
change or due to an explicit ReloadConnections call).
- </tp:docstring>
+ " />
<arg name="connection" type="a{sa{sv}}" direction="in">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Connection settings and properties.
- </tp:docstring>
+ " />
</arg>
<arg name="path" type="o" direction="out">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Object path of the new connection that was just added.
- </tp:docstring>
+ " />
</arg>
</method>
<method name="LoadConnections">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Loads or reloads the indicated connections from disk. You
should call this after making changes directly to an on-disk
connection file to make sure that NetworkManager sees the
- changes. (If "monitor-connection-files" in NetworkManager.conf
- is "true", then this will have no real effect, but is
+ changes. (If "monitor-connection-files" in NetworkManager.conf
+ is "true", then this will have no real effect, but is
harmless.) As with AddConnection(), this operation does not
necessarily start the network connection.
- </tp:docstring>
+ " />
<arg name="filenames" type="as" direction="in">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Array of paths to on-disk connection profiles in directories
monitored by NetworkManager.
- </tp:docstring>
+ " />
</arg>
<arg name="status" type="b" direction="out">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Success or failure of the operation as a whole. True if
NetworkManager at least tried to load the indicated
connections, even if it did not succeed. False if an error
occurred before trying to load the connections (eg,
permission denied).
- </tp:docstring>
+ " />
</arg>
<arg name="failures" type="as" direction="out">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Paths of connection files that could not be loaded.
- </tp:docstring>
+ " />
</arg>
</method>
<method name="ReloadConnections">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Tells NetworkManager to reload all connection files from disk,
including noticing any added or deleted connection files. By
default, connections are re-read automatically any time they
change, so you only need to use this command if you have set
- "monitor-connection-files=false" in NetworkManager.conf.
- </tp:docstring>
+ "monitor-connection-files=false" in NetworkManager.conf.
+ " />
<arg name="status" type="b" direction="out">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Success or failure.
- </tp:docstring>
+ " />
</arg>
</method>
<method name="SaveHostname">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Save the hostname to persistent configuration.
- </tp:docstring>
+ " />
<arg name="hostname" type="s" direction="in">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
The hostname to save to persistent configuration. If blank, the persistent hostname is cleared.
- </tp:docstring>
+ " />
</arg>
</method>
<property name="Connections" type="ao" access="read">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
List of object paths of available network connection profiles.
- </tp:docstring>
+ " />
</property>
<property name="Hostname" type="s" access="read">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
The machine hostname stored in persistent configuration.
- </tp:docstring>
+ " />
</property>
<property name="CanModify" type="b" access="read">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
If true, adding and modifying connections is supported.
- </tp:docstring>
+ " />
</property>
<signal name="PropertiesChanged">
<arg name="properties" type="a{sv}" tp:type="String_Variant_Map">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
A dictionary mapping property names to variant boxed values
- </tp:docstring>
+ " />
</arg>
</signal>
<signal name="NewConnection">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Emitted when a new connection has been added after NetworkManager has
started up and initialized. This signal is not emitted for connections
read while starting up, because NetworkManager's D-Bus service is only
connection list, call the ListConnections() method once, and then listen
for individual Settings.NewConnection and Settings.Connection.Deleted
signals for further updates.
- </tp:docstring>
+ " />
<arg name="connection" type="o">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Object path of the new connection.
- </tp:docstring>
+ " />
</arg>
</signal>
<signal name="ConnectionRemoved">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Emitted when a connection is no longer available. This happens when
the connection is deleted or if it is no longer accessible by any of
the system's logged-in users. After receipt of this signal, the
connection no longer exists and cannot be used. Also see the
Settings.Connection.Removed signal.
- </tp:docstring>
+ " />
<arg name="connection" type="o">
- <tp:docstring>
+ <annotation name="org.gtk.GDBus.DocString" value="
Object path of the removed connection.
- </tp:docstring>
+ " />
</arg>
</signal>
projects / NetworkManager.git / blobdiff